Voice Prompt Guide Android Board for Guide Query Counter, WF-G3399, AndroidSBC, Lima

TL;DR: Voice Prompt Guide Android Board for Guide Query Counter

AndroidSBC peripheral desk: guide kiosk touch, scanner and printer driver SDK declared production-ready serving Lima, Peru. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Lima and Peru importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-G smart guide kiosk Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Lima integrators that matters at two points in a guide kiosk project: the pilot build, where a 1-3 day sample lead keeps a mall opening date honest, and the volume ramp, where a fixed BOM per production lot keeps Peru certification files valid across every floor and every site. Certification, carton labelling and palletisation for Peru are prepared in Shenzhen by the export desk before the Lima shipment leaves, and the test reports stay versioned against the board revision.

WF-G3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Peru importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Peru Buyers

The ninth obstacle is fleet software management. A Lima rollout can reach hundreds of screens across a mall group fast, and without staged update control and rollback, one bad content build takes the whole Peru estate down on the same morning.

The content stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the directory and wayfinding interface on the WF-G family, and provides Peru integrators with a versioned SDK so the Lima deployment can be extended without forking the image. The export desk confirms 67300 boards for Lima, Peru on the Callao - Shanghai lane as of September 18, 2026, the 2nd release on this programme.

Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards

A board quotation is easy to compare and a platform decision is not. For Lima integrators the WF-G family is usually measured against five-option or single-platform competitors on silicon coverage, dual-screen capability, thermal range and the update path that Peru rollouts depend on.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Screen estates keep pulling board demand: dual-screen high-definition guide kiosk programmes in Peru are the near-term driver and Lima integrators are quoting against 2026 delivery windows. Grand View Research sized the global interactive kiosk market at USD 34.79 billion in 2024 and models a 7.2% CAGR to USD 52.74 billion by 2030, with hardware holding more than 44% of revenue. The practical read for Lima is that the dual-screen high-definition guide kiosk board is a platform decision that locks in the content stack for the life of the estate.

• Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3601 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3601 and the industrial WF-G3602 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3602 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

Two numbers decide a Peru guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with Lima integrators on request.

Partner Success Story: Levant Mall Services (mall operations services provider)

A Levant Mall Services deployment in the GCC shopping centres segment illustrates how the WF-G guide kiosk board family supports Lima integrators. Levant Mall Services deployed 67300 WF-G multi-screen boards for mall directory, wayfinding and promotional display walls.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Mall Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus MTC conformity, all bundled into the Shenzhen source-factory shipment.

Levant Mall Services Digital Signage Manager for GCC Shopping Centres noted: Levant Mall Services runs directory and promotional walls off one controller, and the independent triple display output on the RK3588 tier let 67300 screens in Lima carry different content from a single WF-G board.

Field Report: lobby directory terminal installation at a business hotel group

SHENZHEN, September 18, 2026 - Dian Mo, AndroidSBC field desk. Before the cartons closed, every WF-G3399 board ran a 48-hour soak that kept the dual-screen high-definition guide kiosk display, network uplink and touch controller active without a single cold restart. The WF-G3399 smart guide kiosk Android motherboard order for Lima, Peru cleared the burn-in station on schedule and is en route via the Callao - Shanghai lane.

The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Peru integrators, the MTC conformity plus MTC type approval with INDECOPI conformity paperwork is bundled.

Filed by Dian Mo, AndroidSBC field desk, SHENZHEN. Peru integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3399 Application Scenarios

The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G1331 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G6180 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G5270 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8800 plus WF-G1331 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G6180 plus WF-G8800 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1331 plus WF-G5270 carry the guest orientation flow in Lima.
• Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8800 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Lima: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Lima Buyers

Entry into the WF-G family is available on three tracks for Lima and Peru buyers, and they are designed so a partner can move between them without re-qualifying the platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

For Peru partners the decision is commercial, not technical: the same WF-G board ships on all three tracks, and the difference is how much of it carries the partner brand in Lima.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with dual-screen high-definition guide kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?

Answer: Within the WF-G family, RK3399 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Peru?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Peru AndroidSBC bundles MTC conformity and MTC type approval with INDECOPI conformity into the same carton that clears Port of Callao.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Lima and Peru buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Peru team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Lima integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the MTC documentation set for Peru customs at Port of Callao.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Lima integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Lima and Peru the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.