Subway Guide Kiosk Board, WF-G3601, AndroidSBC, Lima

TL;DR: Subway Guide Kiosk Board

AndroidSBC field desk: guide kiosk rollout map updated across retail, transport, healthcare and hospitality venues serving Lima, Peru. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Lima and Peru importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-G smart guide kiosk Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Lima integrators that matters at two points in a guide kiosk project: the pilot build, where a 1-3 day sample lead keeps a mall opening date honest, and the volume ramp, where a fixed BOM per production lot keeps Peru certification files valid across every floor and every site. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Lima and Peru catalogue SKUs.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Peru importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Peru Buyers

The ninth obstacle is fleet software management. A Lima rollout can reach hundreds of screens across a mall group fast, and without staged update control and rollback, one bad content build takes the whole Peru estate down on the same morning.

Thermal and enclosure fit is designed in. Peru programmes that put boards inside sealed floor-standing housings or outdoor pillars can specify the wide-temperature variants, and AndroidSBC reviews the enclosure airflow and power budget with Lima integrators before the layout is frozen. MTC and the MTC type approval with INDECOPI conformity file set accompany the Port of Callao shipment. The export desk confirms 158800 boards for Lima, Peru on the Callao - Shanghai lane as of September 18, 2026, the 2nd release on this programme.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

The comparison that matters to Lima buyers is not board against board but programme against programme, and Peru integrators tend to weigh four things: silicon breadth, driver completeness, unattended-operation features and whether the vendor can carry the software past the first deployment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Touch behaviour is the quiet driver. Visitors expect a directory to respond like a phone: multi-touch, portrait or landscape, anti-glare under retail lighting, and a route drawn on screen in under a second. As those expectations spread across Peru venues, the mall smart guide kiosk board has to carry a calibrated capacitive or IR controller alongside the display and the content client. Analysts tracking Lima deployments point out that boards with a bundled touch driver package shorten the acceptance path, which is often the longest single item in a kiosk handover.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3602 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3602 and the industrial WF-G3566 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3566 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

None of this changes the specification logic: Peru venues still buy on touch response, thermal fit and update control, and the market data only sets the volume expectation for Lima.

Partner Success Story: Levant Mall Services (mall operations services provider)

A Levant Mall Services deployment in the GCC shopping centres segment illustrates how the WF-G guide kiosk board family supports Lima integrators. Levant Mall Services deployed 158800 WF-G multi-screen boards for mall directory, wayfinding and promotional display walls.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Mall Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus MTC conformity, all bundled into the Shenzhen source-factory shipment.

Levant Mall Services Digital Signage Manager for GCC Shopping Centres noted: Levant Mall Services runs directory and promotional walls off one controller, and the independent triple display output on the RK3588 tier let 158800 screens in Lima carry different content from a single WF-G board.

Field Report: floor guide counter installation at a community shopping mall

PINGHU, Shenzhen, September 18, 2026 - Chang An, AndroidSBC field desk. Before the cartons closed, every WF-G3601 board ran a 48-hour soak that kept the mall smart guide kiosk display, network uplink and touch controller active without a single cold restart. The WF-G3601 smart guide kiosk Android motherboard order for Lima, Peru cleared the burn-in station on schedule and is en route via the Callao - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Peru integrators, the MTC conformity plus MTC type approval with INDECOPI conformity paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, PINGHU, Shenzhen. Peru integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G3288 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3399 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1330 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G1331 plus WF-G3288 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3399 plus WF-G1331 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3288 plus WF-G1330 carry the guest orientation flow in Lima.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G1331 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Lima: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Lima Buyers

For Lima integrators the practical question is whether to buy a catalogue SKU, a private-label SKU or a custom design; AndroidSBC supports all three on the WF-G family in Peru.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

Whether Lima buyers take a catalogue SKU or a custom carrier board, the firmware baseline, the driver package and the seven-year update window stay identical for Peru.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with mall guide kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: Within the WF-G family, RK3568 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Peru?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Peru AndroidSBC bundles MTC conformity and MTC type approval with INDECOPI conformity into the same carton that clears Port of Callao.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Lima and Peru buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Peru team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Lima integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the MTC documentation set for Peru customs at Port of Callao.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Lima integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Lima and Peru the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.