Android Board for Singapore for Advertising Player, WF-X9-11, AndroidSBC, Lima

TL;DR: Android Board for Singapore for Advertising Player

AndroidSBC export desk: OEM, ODM and distribution tracks open on the X9 Android motherboard family serving Lima, Peru. The WF-X9-11 X9 Android motherboard spans the smart parcel locker controller with relay driver and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with lock control serial, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Lima and Peru importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

The X9 family from AndroidSBC, a Wanlin Manufacturing Group export brand, is a single-silicon commercial display board line: all twelve configurations share the Allwinner A133 SoC, the PowerVR GE8300 GPU and one Android 10 build. For Lima buyers the practical consequence is that a pilot batch qualified on one configuration behaves the same way on the next, whether the panel is LVDS or MIPI. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Peru, bundled with the lot so the importer clears customs without a second round of test reports.

WF-X9-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-11 (smart parcel locker controller with relay driver) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Peru importers sourcing the X9 family, the WF-X9-11-A variant is the typical configuration for the parcel locker network rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Peru Buyers

Serial wiring is where most competing boards fail quietly. They list two serial ports, but the level is fixed, so the RS232 printer works and the TTL lock board does not, and the Lima integrator ends up adding a converter board that was never in the budget.

For backlight power AndroidSBC supplies the arithmetic rather than an opinion: the 3.3V 800mA, 5V 2A and 12V 2A peripheral budgets are documented per lane, and the MTC route applied in Peru is issued against the factory, not against a reseller. The Lima frame agreement converted to a firm order on September 24, 2026 - 181700 boards, Callao - Shanghai lane, one bill of materials, one firmware baseline, and the Peru compliance pack bundled.

Competitive Comparison: WF-X9-11 vs Competing Commercial Display Android Boards

The X9 family was specified against the failure modes Lima operators reported on previous rollouts, which is why the comparison reads the way it does.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Lima integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Lima usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Lima integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Lima.

Global Digital Signage and Commercial Display Market Trends

Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a Lima buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.

• Entry playback tier: WF-X9-11 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-04 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-05 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The Peru demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a Lima partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Levant Screen Services (outdoor digital out of home integrator)

The Levant Screen Services case in the GCC outdoor advertising segment is a working example of how the X9 family from AndroidSBC supports Lima integrators. Levant Screen Services rolled out 181700 X9 boards across 58 outdoor advertising cabinets.

• OEM relationship: AndroidSBC private-label SKU shipped with Levant Screen Services branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus MTC conformity, all bundled into the Shenzhen source-factory shipment.

As Levant Screen Services Project Director for GCC Outdoor Advertising put it: Levant Screen Services runs unattended street cabinets on the wide-temperature X9 tier, and 181700 units hold a 24-hour duty cycle across the Lima network.

Field Report: parcel locker network rollout at a residential estate

YANTIAN, September 24, 2026 - Feng Chi, AndroidSBC field desk. The WF-X9-11 board designated for the smart parcel locker controller with relay driver application was pulled from the same production lot as the pilot batch, so the Peru team received an identical configuration. The WF-X9-11 X9 Android motherboard order for Lima, Peru cleared the burn-in station on schedule and is en route via the Callao - Shanghai lane.

The WF-X9-11 smart parcel locker controller with relay driver production lot includes the WF-X9-11-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Peru integrators, the MTC type approval with INDECOPI conformity paperwork is bundled.

Filed by Feng Chi, AndroidSBC field desk, YANTIAN. Peru integrators typically request CE plus local radio interface notification for X9 commercial display board deployments.

WF-X9-11 Application Scenarios

The WF-X9-11 smart parcel locker controller with relay driver sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-11-A configuration is the typical build for the parcel locker network rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-11 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-06 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-07 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-08 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-09 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Lima: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Lima Buyers

AndroidSBC does not force a track on Peru partners. The three below are the ones that actually get used.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks give Lima partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the X9 Android motherboard family support a parcel locker controller with relay driver?

Answer: Yes. The parcel locker controller with relay driver is built into the X9 family as a standard configuration, and the Lima pilot batch ships with that configuration already loaded and tested.

Which configurations are available in the X9 family for Peru buyers?

Answer: Twelve configurations are available, all on the Allwinner A133 quad-core Cortex-A53 1.6GHz platform with the PowerVR GE8300 GPU. The variants differ on memory, storage, panel interface, touch type and the network path, and Lima buyers pick the combination that fits the screen.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes. A single X9 board drives an LVDS panel at 50Hz or 60Hz or a MIPI DSI panel at 30 or 40 pins, and enumerates infrared, optical, capacitive and resistive touch as standard HID devices, with the jumper map bundled in the source-factory shipment.

What is the minimum order quantity and the sample lead time for Peru?

Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation, custom Android OS builds, boot branding, pre-installed apps and SDK modules are standard services, delivered against the same seven-year update window.

How are firmware updates delivered to a Peru screen estate after deployment?

Answer: Updates are delivered through a staged OTA channel: the Lima partner pilots on a small group of screens, holds the rest, and rolls back the image if the pilot shows a regression.

What shipping terms does AndroidSBC support for Peru orders?

Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Lima delivery date holds.

What happens if a board fails in the field in Peru?

Answer: The warranty path starts from the serial number. The Peru partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.

Contact AndroidSBC: Start Your WF-X9-11 Sourcing Conversation

To start an X9 Android motherboard sourcing conversation with AndroidSBC, Lima integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Peru buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the X9 family.